XT AUTO 8pcs 12V Super Bright 30cm 15 LED Flexible Waterproof LED Strip Light for Car Interior & Exterior Decoration DRL Day Running Light Or Boat Bus Garden
$9.99
Guaranteed Safe Checkout
Features & Compatibility
Price: $9.99
(as of Mar 27, 2026 12:50:06 UTC – Details)
Specification:
– Width: 1cm
– Voltage: DC12V
– LED type: 3528
– LED Quantity: 15LEDS
– LED Strip length: About 30Cm
– Output power: 0.9W/pcs
– Working temperature: -20 to 50 degree
– Lifetime: 20,000 hrs
– Waterproof: IP67
Features:
– Super bright and long-lasting LED
– Low power consumption, long service life
– Easy to install and clean
– Waterproof, Solid-state, vibration-resistant
– With flexible and durable strip, can be cut to your expected length
– Self-adhesive on back, easy to install, flexible and can bend to any shape
Application:
1. For transparent or non transparent material around lighting.
2. For outline for the path and signs, illuminated advertising signs, etc.
3. For car decoration and advertisement sign lighting.
Package included:
8 x 30cm 15 LED Strip light (NOT IN RETAIL PACKAGE)
Size: Length: 30cm (11.1 inch) Width: 1cm (0.4 inch)
Easy to install, flexible and can bend to any shape and anywhere
Super-bright but running with low temperature and low power consumption, high intensity and reliability, Long lifespan >50,000 hours
Waterproof protection ideal for both interior and exterior decoration,All the light spread and completely smooth,luminous very even,Well-distributed lighting.
For use with cars, motorcycles,bikes,tree, swimming pool and all outdoor decoration for Events Use: interior & exterior,hallways, stairs, trails ,windows, Light up colorful life hotels decoration use,Theaters, clubs, shopping malls, festivals and performances Eco-Friendly.
Bryan –
Not bad brightness
I mean, you get what you pay for obviously.They are OK for the money. A bit flimsy, but have a good brightness. I have ordered these a few times. Order a large roll of 3M double sided tape with them. They tend to not like to stick well. I give them 5 stars. The first time, I would have been frustrated..but working with them several times now, I know what I need to do to make them great.
Chris Gurley –
You need to buy these before they go away
I bought these to replace a bad led light strip on the mudflap of my pickup truck. As luck would have it, it was a direct replacement. These days I want to bring as much attention to my brake lights as I can with everybody’s head buried in their phones.I replaced both left and right strips for uniformity. I cleaned the surface with alcohol before applying the strips and one adhered nicely. It was a cold damp day and by the time I finished wiring the second one the adhesive did not stick as well and I ended up using spray contact cement to make it stick the following day when the rain had stopped. This is a great product for a very reasonable price. It would be silly not to buy it if this is what you are looking for.
C+C –
Ok, but not great.
Surprisingly, they all worked. They aren’t “super bright” by any means, more of a pleasant glow. I used them as interior lights in the cargo area of my Cherokee, but they are not bright enough to rely on to find specific items in a bag. Not disappointed, but I did expect them to be brighter. First thing I did was peel off the generic adhesive, and put on automotive strength 3m. There are literally three conductors in each wire. Soldering was a challenge, forget about using butt connectors, the wires are so thin, the connectors wouldn’t be able to get a bite on them.
SW –
Great for under dash lighting
My wife’s new car had a dark spot where the switches light up when they are turned on. But, at night when those switches are off… you can’t see them. I placed one of these under an overhang above the location and presto- we can see the switches now! Mind you I had to trim the LED strip down to where there are only three LED’s on the strip. NOTE: you can cut the strips behind every 3rd LED and therefore make the strip the length you need, ie.3,6,9,12 LED’s. Minimum of 3 LED’s required though. The sticky tape on the back of the strips did not work so I put a couple small drops of super glue on the strips and solved it. Ran the wiring to the fuse panel where I tapped into a fuse that is only HOT when the ignition is on, and added an inline fuse for the LED wire. NOTE: LED’s will not work if the positive and negative wires are connected backwards. I recommend these, they work great!
Travis A –
Good for the price
7 of the 8 lights worked good. Are they the brightest LEDs? No, but they are good for the price. The wires are super small, but they have been good enough. The ice blue looked more white to me, but everyone’s eyes are a bit different. Have not installed them yet.
Matt –
12 Volt Rubbish
If you’re looking for an LED strip with a soft glow, unreliable adhesive, and ultra-thin 26ga wiring that occasionally comes free from its soldered points, then look no further!These are NOT “super bright” by any means. I tested each strip before installing them, and found they were quite dim. I was a little disappointed, but willing to live with it.Then came installation. I prepped my surfaces (raw aluminum & powder coated) with denatured alcohol & microfiber rag. Ambient temps were 80°F. I then carefully pressed in place, each strip. By the third strip, I noticed that the first strip was lifting. They stuck slightly better to the raw aluminum, but not much better. I attempted to salvage them by using 3M double-sided tape – the 3M tape stayed strong to the surfaces, but the fetching lights would still pull from the adhesive!Then the wiring. Oh that awful, peach-fuzz-thin, stranded wire that requires tweezers and a steady hand for soldering. Also, a couple of leads came undone from the solder points on the strips, as I was routing the leads.I knew $9.xx was a pretty low price, and sometimes you get lucky. This time, I was not so lucky. I would stay away from these.
robert brown –
Bright
I bought a set of these lights for my motorcycle I wasn’t expecting nothing amazing but once I got them installed and turned them on WOW!!!!! I was blown away they are bright and well worth the amazing price I will be buying more for my other bike
Amazon Customer –
Spectacular LED’s…Great $ value!
I used a pair of the blue 12″ strips to illuminate each of my two Chicken Bone Saloon lucite wall hangings being illuminated with merely a 9v radio battery which lasts for over 2 weeks constantly. I installed a microswitch on each and gray 3M autobody tape (red release liner) to ensure great adhesion. I had read reviews of marginal tape ashesion strenth on these LED strips and this art was deserving of perfection. Love these and such a spectacular $ value!!!
Dale Smith –
excellent product, very happy with my purchase
Chris McDonald –
I used these LED strip to provide foot well lighting in my VF Commodores integrated into the wiring loom. All the lights are still working well after two years of service. The only concern that I have with them is the heat shrink wrap around where the wires go into the strips are not secure. Also note that the wires of the strips are quite thin and difficult to manage during installation, but no issues with them as such.
Kooner –
Its very cheap quality product with very minimum light.
dave b. –
the back sticking came packed bent / crooked when the tape comes off it dries and wont stick—seller needs to package them FLAT not all bent up poor for using— but the lights are bright if you can use them somehow—im going to try silicone but i shouldnt have to!!!! no way buying again ever