Wheel Cleaning Brush Car Detailing Kit – Rim Brush, Lug Nuts and Wheel Cleaner Brush Car Wash Kit -Tire Brushes for Cleaning Rims – Car Cleaning Supplies and Rim Cleaner Brush Set
$29.95
Guaranteed Safe Checkout
Features & Compatibility
Price: $29.95
(as of Mar 29, 2026 17:02:23 UTC – Details)
Product description
A Patented All-In-One Auto and Wheel Brush Cleaning Tool for cars, SUVs, minivans, pickup trucks, motorcycles, and recreational vehicles. With a tapered and narrowed tip, the WoollyWormit bendable brush fits in to clean between the spokes, the inner rim, tiny spaces, and corners with ease. You can even bend it to clean the hard-to-reach areas, like the back side of the spokes. This is nuts! On the end opposite of the WoollyWormit brush tip is the handy lug nut cleaner, designed to clean the exposed surfaces of the lug nuts, and the hard-to-reach areas of the rim cavity surrounding the lug nuts. The kit comes complete with two sizes of lug nut cleaners and four cleaning sponges for each. Note: The compressed thickness of the brush tip is about 1 inch. Therefore, the minimum gap space required for the brush to reach within is greater than one inch.
Q: Will the brush fit my tightly-spoked wheels?
A: The brush works with openings greater than 1.5 in x 2.5 in. For smaller gaps, the brush will not fit. Please see the Wheel Compatibility Guide for more details.
Q: Will the brush fit between the brake caliper housing and the back of the spokes?
A: Yes, if there is space, which requires minimally 1.5 in x 2.5 in. Please see the Wheel Compatibility Guide for more details.
Q: Will the brush fit between the brake rotor and the inside of the wheel barrel?
A: Yes, if there is space, which requires minimally 1.5 in between the rotor and barrel, and at least 2.5 in. between the spokes. Please see the Wheel Compatibility Guide for more details.
Q: How do I maintain the brush for long use?
A: We recommend rinsing the dirt and sand off of the brush when washing your wheels and cleaning the brush cover after each use to prevent buildup. Replacement covers are available when needed.
Q: Are there replacement covers available?
A: Yes, from the manufacturer.
Q: Are there replacement lug nut cleaner sponges available?
A: Yes, from the manufacturer.
Clean Car Rims and Wheels in Less Time: The 13.25″ long flexible Chenille microfiber-covered brush fits in and between wheel spokes and openings to clean deep inside the wheel barrels, bends to reach and clean behind spokes, while rigid enough for scrubbing inside the wheels of automobiles, pickup trucks, vans, and motorcycles. *IMPORTANT dimension information regarding the brush fitting your wheels: brush passes through openings greater than 1.5 in. (3.8 cm.) x 2.5 in. (6.4 cm). Please check the Wheel Compatibility Guide.
No Metal Parts Exposed, No Scratches: This car wheel cleaner brush and rim cleaner prevents scratching and damage to surfaces, spokes, and corners because there are no pointed metal tips or twisted wire bodies to scratch your paint. Plus, there is no splatter like bristle brushes! Tip: Rinse well during and after use to prevent road grime, grit, and sand from the dirty wheels from scratching the surfaces.
Integrated Lug Nut Cleaner: The only patented wheel brush for cleaning wheels with an integrated lug nut cleaner. Effortlessly cleans lug nut areas quickly and easily. Every package includes two different-sized lug nut cleaners, each of which comes with four cleaning sponges. Tip: The cleaning sponges are designed for multiple uses, and replacement sponges are available.
Patented Design: Our patented car wheel detailing brush design allows you to clean with or without the handle. Go handle-less for a thorough wash or attach the handle to increase reach by 4.3 inches! The wheel brush fits and cleans openings greater than 1.5 in (3.8 cm) x 2.5 in (6.4 cm). Please refer to the Wheel Compatibility Guide for important information about minimum opening sizes for brush to fit. Tip: The lug nut cleaner attachment is not to be used as the handle. WoollyWormit Wheel Brush United States Patent Numbers: 10,766,465 and 10,029,655.
Removable and Replaceable Cover: Throw your dirty cover in the washing machine and get it back like new! (Remember to hang dry.) Replaceable covers are available, ensuring that your brush stays fresh and effective for long-term use. Tip: Frequently rinse road grime and sand from the brush while cleaning the wheels to prevent scratching the surfaces. Wash the covers between wheel cleanings to keep them fresh for the next use.
Diana –
Makes a ‘not so fun’ job much quicker and easier while still getting quality results
I’ve been detailing cars as a hobby for 20+ years. I purchased this tool for use on my C7 z51 Corvette and an Acura MDX. If your expectation is for this tool to hop out of the box, dance a jig, and then clean your wheels effortlessly… you will be disappointed. However, i found that it did take a job i’m admittedly not particularly fond of, and make it a lot quicker/easier, while still yielding great results. This tool is very well made and sturdy, though i would still recommend the use of a long bristle tire brush for the surface wheel/tire cleaning. The area this tool really shines is in that you can bend and flex it to fit all the nooks and cranny’s of your vehicles wheels, calipers and rotors. It does a fine job of molding to the barrel of the wheel to get old brake dust that accumulates over time and its a tool that i can see will definitely have cumulative effects (ie. each time it takes off more old deposits). My favorite feature is the lug nut polishing sponge. While you may have to try more than one sponge/plastic holder (many sizes included)… when you do find the right one it does a FANTASTIC job at getting brake dust out of the lug holes. My nuts have never been cleaner! That aside, its easy to clean and hangs nicely to dry. Its not an inexpensive tool, but take a second and think of all the gimmicky crap you’ve tried over the years that didn’t work at all. This tool does work and you can tell it was built by someone who thought through the requirements of the job. Hope this helps!
Deebz –
This is my favorite interior wheel cleaning brush.
When was the last time you enjoyed cleaning the interior wheel areas of your car or SUV? Sure, it’s easy to brush clean the exterior tire and wheel, but that interior part is a challenge. You know, those places where dirt and brake dust accumulates with abandon. It is a challenge, but if done well, the reward is a brilliantly clean wheel that enhances the appearance of your vehicle.Long, narrow bristle brushes are adequate for cleaning, but these are also mounted on metal rods that might just scratch those precious allow wheels. Also, bristle brushes often miss large swaths of the interior rim and are notorious for spraying back grime onto clothing. Try cleaning that out of cotton shirts. Good luck.CLEANING WHEELSThe Woollywormit wheel brush is designed with a non-abrasive, flat plastic frame that is covered by a soft chenille microfiber covering that grabs the grime on interior wheels and allows you to safely wash it away.Its microfiber is soft and absorbent. After wetting the material in a bucket of your favorite wheel wash detergent, just insert into the wheel crevices and lightly brush. Its flat profile allows it to squeeze easily between the wheel and brake caliper to reach that little area that always defies a good cleaning.With extremely dirty wheels, this may become a two-step cleaning process. First, use a detergent that will remove major build-up, then rinse the interior wheel while running water from a hose as you brush. This approach speeds up the process of washing away the grime and lets you verify progress and identify any missed spots.The second step after rinsing the wheel with water is to use a second wash bucket and a ceramic wash-and-wax product. The brush will both clean and apply a wax coating to the interior rim and make it hydrophobic.LAUNDERINGWashing the Woolly is easy: use a microfiber safe cleaning process. Remove the covering and drop it in a washer and use a microfiber safe detergent. Wash in warm/hot water below 140°F on a heavy cleaning cycle. Wash it alone because the product was used to clean abrasive grime. It is also dryer safe as long as you use a very low heat setting.LUG NUT CLEANERAn honorable mention goes to the foam integrated lug nut cleaner that is attached to the other end of the plastic frame. While useful in a pinch, a dedicated detailing brush might actually be a better choice for reaching deeply recessed lug nut areas.
Doug B –
Good tool for cleaning lugnuts and wheel barrels with a few caveats
I first borrowed a similar tool from my neighbor to clean the spokes and barrels of the rims on my new car, but I came to the conclusion that nothing works as well as a mitt to clean the front side of the wheel so that you can get every surface on the wheel including the intricate crevices and behind the spokes. However, you still need a tool to clean the wheel barrels and lug nuts and this product works pretty well for that, with a few caveats.The “handle” on this product is definitely a little weird and could use a better design. I wear gloves when cleaning the wheels since I first apply a cleaning product and this makes the awkward finned all plastic handle a little easier to hold but I definitely wish it had a thicker solid possibly rubber covered handle since the brush side is pretty long and it can get top heavy especially when it has absorbed water. The brush has a good length and you can bend it and it will stay in whatever shape you put it in. The spokes on my BMW wheels are wide enough so that I can put this between them and get a good portion of the wheel barrel cleaned in both directions and it will fit between the brake caliper and wheel barrel but barely. The micro fiber fingers are very soft and should not scratch at all. The brush portion is easy to put on and remove from the bendable support form for cleaning and/or storage.To clean lug nuts, you slide the red lug nut sponge holder over the bottom side of the handle and then slide one of the foam sponges over the four tabs. The sponges fit over the tabs very snugly and once you get it started a little bit, you basically have to pull down on each side of the sponge to get it all the way down to the base. I keep it all put together in one piece so I basically have to hold the brush portion to move the lug nut cleaner half over the lug nut and twist to clean. The foam form is a little on the short side and the bottom of the plastic sponger holder handle will come in contact with the top of the lug nut. As long as you don’t slam it hard over the lug nut, it shouldn’t do any damage. I did all four wheels with one sponge and then rinsed afterwards and it seems fine, so each sponge should last for more than one cleaning.It is not perfect, but once you get it put together and figure out how to use it, it gets the job done well.
SFM –
It fits between the spokes of the wheels of my 2020 Kia Stinger GT-Line with 19″ wheels.
Ashley Oldfield –
Love it
Chris –
This tool is amazing gets behind the rim its bends to get every spot.I would recomend this tool it does a great job on the lug nuts
Jason P. –
Gets in behind the wheel spokes and the lug nuts exactly what I wanted
William Passey –
Best wheel brush ever