Grandview 10pcs Green T4.2 COB 1 SMD Led For Dashboard Instrument Cluster Light Car Light Bulb Side Light Indicator light Interior Panel Bulb Light 12V

This is T4 not last to long!!!! I change 10 already in less than 3 month?!
This is exactly light what i need it and it is absolutely best buy what i could get from all this with 2 led or 3 led etc. Let me tell you i been changing to many bulbs on my ac control for years and none of them give me satisfactory on brightness . This is first time that i found bright enough even better than bright and fit perfectly in housing. Love the bulbs and i actually just purchase 20 more so i have them in spare bc those are very hard to find . Best money spend on bulbs! Thank you !UPDATE!!This bulbs are bright but after you turn lights on for few time they start to flickers and after that just die !! They do not last for near one week without flickers or just stop working ! I never had worse one so far to burn or die that quick. Definitely not worth buying ! Look in my hand how many is bad and i buy first 10 on end of January . I buy extra thinking i will have them for long time. Nope ! One plus pack is already gone .

Took some trimming but they work well.
Used this pack of LEDs on both an 03 Sequoia and 04 Tundra. Brightness is good and just a bit warmer (color range) than the original bulbs.As for longevity, two months in these are working well. I’ll chime in in a year or so on if they are still working.Fit was a bit of a challenge. These were not a direct install. Some trimming had to be done on the plastic as it was about 1-2mm too thick. I used some needle nose pliers to hold the light and trimmed away from the bottom of the “notch” to enable this to fit. Once done these went right in and have been working since.When installing these, be sure to verify their operation before you put your vehicle back together. Since these are diodes, essentially one-way valves for electricity, they only allow current to flow one-way. So if the light doesn’t work initially, remove it and turn it around.One other tip I can give is to not put too much torque on these bulbs, the plastic is relatively pliable and will deform if pushed too far. If you feel you are having to push too much to get these to seat, try trimming them.

Great until a week later
Bright, awesome red color, exactly a week later half of them are out. And these are the lights that ARE NOT on 24/7 and are only on at night and I drive like 75 miles a week lol. Yeah, so I have to rip the whole dash out again and center console to replace a few bulbs. Then who knows how long those will last then I’ll have to buy something else. Smh I was just praising these things literally got in the car and then they started flickering and the other side wasn’t even on. SMFH

None fit correctly (C5 corvette). Many failed in under a year.
I put these in my C5 corvette. There are many places where a T4.2 can be used and I replaced all of them. They don’t go in easy due to the PCB thickness. I had to bend the leads until they fit well. In less than a year about half of them have started to flicker or completely fail. I took one apart and it was definitely due to the poor quality of the LED bulb used in these and not my modifications. I would steer clear of these unless you want to continually replace them. They did look very good when they worked.