Dasbecan TK78-66-9U0C Mazda Apple Carplay Android Auto Retrofit Kit Compatible with Mazda 2 3 6 CX3 CX5 CX9 MX5 Miata 2014-2020 Adapter Interface Port MZD Connect System 00008FZ34 (2024 New Upgraded)
$58.99
Guaranteed Safe Checkout
Features & Compatibility
Price: $58.99
(as of Apr 01, 2026 07:59:14 UTC – Details)
Product description
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
1 Installation Tips
2 FQA
3 FQA
4 Various of Carplay Units
5 Warm Tips
Why does my Carplay encounter frequent disconnection after using for months?
1.The plugs of these wires are loose or pulled too tight, resulting in poor contact . 2.Because of the internal instability of Mazda system. Please update your OS version to above 74.00.021 N AN/ F AN. ThIS version will be more stable.
Do the Carplay Kit fits 2018 Maxda CX-5?
Yes,it fits Maxda CX-5 2015 -2020.
Why does my Mazda carplay cannot work?
1.Pls check your carplay is update to 70.00.01 or above. 2.Please check whether the Siri is opened when connecting. 3.Check whether it is caused by the connection line does not touch well! 4.Make sure that your car have MZD connection device
Why dos the GPS or navigation cannot work properly?
Before upgrading the firmware, you should remove the SD card and insert it when you complete the upgrade in case the navigation cannot work.
If the carplay have worked for several months and failed,what should I do ?
You try to restore the carplay to Factory setting or send message to us.
【Replace】 The mazda carplay retrofit kit replaces# TK78-66-9U0C K1414 00008FZ34
【Fitment】This mazda apple car play retrofit kit is suitable for Mazda CX3 2016 – 2019 ; Mazda CX5 2015 – 2020 ; Mazda CX9 2016 – 2020 ; Mazda 2 2016 -2019 ; Mazda 3 2014 – 2018 ; Mazda 6 2016 – 2020 ; Mazda MX-5 Miata Club / Grand Touring 2016 – 2020 ; Mazda MX-5 Miata RF Sport 2018 – 2019 ; Mazda MX-5 Miata Sport 2018 – 2020 (If your car does not have an MZD connection device, it will not work)
【Wired Carplay & Android Auto】Our mazda apple carplay kit supports Siri for IOS and Google Assistant voice control for Android, Stay connected to your world while keeping your eyes focused on the road with our smartphone screen mirroring kit. Accessing to map navigation, phone contacts,music and notifications can bring you more convenience.
【Attention】1.Please make sure your system must be on version 70.00.021 or higher, if not, pls contact us to help you upgrade the firmware. 2. During installation,the carplay connect is USB1, Siri must be turned on to connect to CarPlay 3.Before upgrading the firmware, you should remove the SD card and insert it when you complete it in case the navigation cannot work
【OS Version Upgrade】This carplay kit can work with the version 70.00.021 or higher,but if the car is in turbulence causing frequent disconnection of the connected Mazda Carplay, it is due to internal instability of Mazda system. Please update your OS version to above 74.00.021 N AN/ F AN , after testing , this version will be more stable.
Digital Donkey –
Transforming Mazda 3 into a Smart Tech Hub
The Dasbecan Apple Carplay Android Auto Retrofit Kit is not just an upgrade; it’s a revolution for your Mazda 3 driving experience. This kit seamlessly brings the cutting-edge connectivity and convenience of Apple Carplay and Android Auto into the cockpit of your Mazda 3. It’s like giving your car a brain transplant, upgrading it from a regular vehicle to a smart, connected companion.The installation process is a key highlight. Designed with the Mazda 3 in mind, the retrofit kit fits like a glove. It’s a relief to find an aftermarket product that meshes so well with the existing system. The integration is so smooth, it feels like these features were always meant to be part of your car. For those who are not mechanically inclined, a professional installation is a good idea to ensure everything is up and running perfectly.Once installed, the functionality is a game-changer. The system brings the familiar interface of your smartphone to your car’s dashboard. Whether you’re an iPhone devotee or an Android aficionado, this kit bridges the gap between your phone and your car. Maps, music, messages, and more are all at your fingertips, or better yet, a voice command away. It’s a seamless transition from your digital life outside the car to inside.The user experience is smooth and intuitive. The response is snappy, and the interface is user-friendly. It’s like your car’s infotainment system got an upgrade to first-class, with all the modern conveniences you could ask for. The integration with existing controls and the touch screen enhances the overall driving experience, keeping you connected without being distracting.The quality of the components in the kit is top-notch. Everything feels well-made and durable, which is reassuring when you’re modifying such an essential part of your car. The attention to detail in design and manufacturing means that this retrofit kit doesn’t just add functionality; it also adds value to your vehicle.TL;DR: The Dasbecan Retrofit Kit is a must-have for Mazda 3 owners looking to modernize their ride. It brings the ease and functionality of Apple Carplay and Android Auto into your car with a seamless, integrated experience. The kit not only enhances your driving experience but also adds value to your vehicle with its high-quality components and intuitive design.
TobycW –
Great
A video on youtube had a link to this product. Not sure what the differences are between so many similar. This product ended up great. Quality looks very good. Had a thorough manual and OE looking cables and module. Had a bunch of zip ties and foam included. Once installed in my 2017 MX-5, everything worked perfectly. Had full use of the steering wheel buttons and center console buttons. I am not sure but I think Mazda locks out the touch screen when in motion.Install on an MX-5: I did not remove the shifter console! It took about 45 minutes in all. Follow the youtube video to get to the cmu. Then do the following: For the USB module, remove the passenger side center console side trim in the footwell. Remove the “H” looking trim to the sides of the USB module. Remove the Seat heater controls/airbag lights module above the USB module. From the side where you removed the passenger console trim, you should see top and bottom clips of the USB module you want to remove. Take a long but small flat head screw driver and one-by-one break the clips. It should be easy to push it out from behind now. Saved me so much time doing it this way and I hope it does for you too! Remember, all trim is held in by clips or fits like a jigsaw puzzle. NEVER force anything. A nudge and a pull should be all that it takes. I broke nothing on mine installing it. There are a couple of good youtube videos for the MX-5 that you can look at before you start.
BigEVC –
Great Product
Great product, works perfectly! Installation is kind of tricky, but there is a great video on youtube that walks you through it step by step. Highly recommend as a cheap easy way to have carplay!
angel villacis –
Did your car play / android auto stopped connecting
I’m sharing some feedback on my device in case anyone else runs into a similar problem I recently had.The device works great make sure you properly install everything and it’s nice and secure. I used black tape in order to make sure the cable is in good shape.I currently use it with a carlink 5.0 for wireless.But at some point wired stopped working. Fast forward I had this device nearly 3 years. And my device suddenly stopped working. After much extensive trouble shooting thinking it was the wireless device I test it with another wireless and was having the same issue.I decided to look at the box and unplugged everything under my elbow arm rest which is where the box sits at and I unplugged everything and plug everything back in and the adapter started to magically work again.For anyone with a similar issue please uninstall and install the box cables before ordering a new one before disregarding this device. I’ve had it for nearly 3 years and its still working well.If I run into any more issues I’ll do a follow up review but so far it works great.
CJ –
Great Value Added!
Got this to install in our son’s 2016 Mazda CX-5 GT. Found some great YouTube installation videos and installation took just around an hour from start to finish. The instructions that come with it are pretty limited to just the wiring (not taking apart the dash to install), but the videos we found were a great complement to the wiring instructions provided. All in all, super straight forward and seems like a crazy good value for being able to add Android Auto/Apple Carplay to the built in visual display. Very happy that we bought this.
Amazon Customer –
Install was easy. Product has great before and after sale support. Customer Service takes care of any concerns. I had updated software earlier, removal of panels was easy, ran cables behind the dash, took 30 mins. OEM controls work, nav works and apple carplay works fine. Make sure the usb cable is oem apple to avoid any issues.Overall happy and dont think twice, buy it. Feels like a new ride now with better map music etc. Im thinking of buying another one.
sakyuz –
YouTubeでも取付けされてる方がいらしたので、購入。自分でも交換取付けしました。海外からなので、届くまで1週間くらいは掛かります。カーオーディオをご自身でされる方なら出来ます。配線通しと、本製品の元になる純正品をグローブボックスから4カ所のスナップフィット外す時が苦戦しましたが、手前側2箇所外した状態から少し回転する様に動かしたら手の入らない反対側のスナップフィットも外れました。 取付け後は問題なく動作し、Googleマップをモニターに映せる様になりました。iPhoneとは有線接続となりますので、無線Bluetoothでの劣化が無く、音圧が向上。勿論充電もされます。本製品のUSBと有線接続でYouTubeなどの動画は、(AppleCarplayのアイコンには無いのでモニターには映せませんが)音声は車のスピーカーから出せます。これが有線なので、今まで古いBluetooth規格での遅延が解消されました。音声が流せた仕組みが分からないので、どの車種でも出来るのかは分かりかねます。
Dex –
Total schön, Auto ist in moderne Zustand!! Price Leistung gut, empfehlen kann ich nur!!
Juan P. –
Que funcione
Kevin –
No complaints after having it installed for a few months now. Everything works perfectly. Make sure you follow the steps and its an easy (if slightly back breaking due to limited space) install. Plenty of youtube videos show the exact breakdown of the install.June 2024 update: stopped working a little over a month ago. Plugging phone in will charge the phone but won’t trigger androidauto or applecarplay. Also tried changing wires without success.