A-Premium Set of 4PCS Mud Flaps Splash Guards Mudguards Mudflaps with Hardware Kits Accessories Compatible with Ford Explorer 2011-2019, Front and Rear (Driver & Passenger Sides)

great fit
these fit and look like the factory supplied them.  Super easy install.  It took maybe 20 minutes to do all 4.  Very sturdy and no gap behind them to trap snow, ice slush or salt. Highly recommend them.

worth a purchase if you are handy.
I purchased these mudflaps for my 2015 ford explorer limited. I didn’t want to pay $80. for Ford flaps and these look stock once installed. If you are somewhat handy and take your time they are worth it as they are less than half the cost of Fords. First of all, in the rear you should be able to remove two factory screws that will allow you to match up your mud flap with the holes and screw them in. There is a simple metal clip and screw for the top section of the mud flap. That makes 3 very secure connections in the rear and that’s all I chose to install. The fronts require a plastic rivet tool or flat head screwdriver to remove 2 plastic rivets to match up the mud flap and then go through again. Again, use a metal clip and screw in the front and that makes 3 good connection points for the mudflap. The bottom matches up with another plastic rivet. You will probably destroy the rivet removing it like I did. Just go to a local automotive parts store and but a few new plastic rivets for a buck and install.This kit is more difficult than some to install I’m sure. But, if you’re into saving over $40 bucks this kit is worth every penny. I’m glad I purchased and installed them.P.S. its much easier if you remove a tire when installing the mudflap for that wheel. If not, you will need a very short right angle drill or tool to remove. Just jack up the car and remove the tire, its a ton easier if done that way. All in all maybe it took me 1 hour to do the job taking breaks and thinking about it as there were no instructions included. Totally worth it! Just know what you are getting in to.

Great Item
Great Item , Great seller – Fast shipping

Box did NOT include fasteners shown and described.
These mud flaps fit well, but there are no installation instructions, and they did NOT include the hardware kit in the description or picture. I had to order fasteners separately. I would have returned them and reordered, but the replacements might not have fasteners either. MAYBE yours will.

Good product. They seem like durable mud guards. Installation was a breeze and fit perfectly on my 2020 Explorer ST. The only supplied hardware I ended up using were the clips. You can use the existing wheel well bolts from your car. I did not use the supplied screws as it would have been difficult to access the phillips head. A ratchet wrench will come in handy during the install. I may end up adding one more screw to the front 2 mud guards (you’ll know why when you install them) – but they seem to be fine as they are. Happy with the purchase & the fact that my rocker panels will be much cleaner from now on.

Fit very well and easy to install.