A-Premium Set of 4PCS Mud Flaps Splash Guards Mudguards Mudflaps with Hardware Compatible with Chevrolet Equinox 2010-2017, Sport Utility, (w/Fender Flares), Front and Rear (Driver & Passenger Sides)

Perfect Fit 2019 Equinox
Just spent a little over an hour installing these, perfect fit!Only downside I would mention is there are no instructions.You will need a Phillips screwdriver, and a T10 or 3/32″ Allen wrenches or bits to remove the existing screws.A battery powered drill is advisable as well with a 1/8″ drill bit.Back flaps are cake, 3 factory screw on each side, unscrew, place your flap, screw them back in, holes were where they should be.Front flaps take a little bit more work. Turn your tires far left if you are doing the left side, unscrew the factory screw. hold the front flap in place, put the bottom screw back in for alignment purposes and use your drill to make two 1/8″ holes in the plastic using the holes in the flap as your guide.. Take the flap back off, use the 2 metal clips provided and work them in so they are centered on the holes. Put it together, move your tires to the far right and repeat for the other side.These are nice and subtle, a nice factory look. Enjoy!

The best aftermarket option, but far from perfect
These are hands down the best aftermarket option, very affordable, and look great.I have them on 2012 Chevy Equinox LT.The bad is that I can confirm as others have stated: installation is a pain, there are no directions, fitment is poor, and you will need extra tools.For context I am a weekend warrior DIY person. I have installed 2 other sets of aftermarket mudflaps on other vehicles and this set still took me over an hour to install and frequent trips to the toolbox.Included are the mudflaps and hardware for installation (clips and screws). For removing the existing hardware a flathead screwdriver is needed to pop out the factory trim retention clips which can be discarded. On my 2012 LT the rears also had one torx head screw that needed to be removed, so that required more tools.After all existing factory clips were removed the next step is to place the clips the provided screws will be catching on the inside to secure the mudflaps down. These can prove to be quite the challenge. Without a car lift I was frequently laying under the car crawling around attempting to get the correct alignment of the clips. These is where it gets interesting.The clips do not align with the pre-drilled holes. Like at all. Pushing around as hard as I could even with the mudflap in place, fitment is poor. I found myself threading the screws through at quite extreme angles to be able to catch the clips. Nothing fits straight on/ straight shot.One was so far off (see picture) I opted to reach for a drill and punched my own new hole through as after my first 2 screws were in, the third hole was nowhere to be found.All in all, the product looks great. I am happy with the price. For a DIY person and a full toolbox and previous install experience it was an easy hour long project with minor modifications and a few extra attempts at attaching as nothing fit correctly on the first try. Had I approached the project as a first time experience with nothing a screwdriver, that would have made for a very frustrating afternoon.All the best!

Great
Great

Excelente 👌
Quedo excelente en mi equinox 2017

Perfect and new. Fits 100% thx.

Nice sturdy product. Perfect fit. They are mud flaps so a couple inches longer would be better for dirt kicked up. Rear flaps installed in minutes and super easy. Front ones need a special touch and finesse to secure without drilling holes in fender. I had to remove fender liner a bit to get a support installed behind liner. Worked out great but hours invested for front install.

Facile a installer, fit parfaitement sur equinox merci