LISEN 15W Magsafe Car Mount Charger, Magnetic Wireless Car Charger, Suction Phone Mount, Vacuum Magnetic Phone Holder for Car Mount for iPhone 17 Pro Max 16 15 14 13 12, Samsung S26/S25, Pixel 10 Pro

The Go Anywhere Magsafe Mount
So I have had this product for a little while now and I have tried attaching it to pretty much everything. My car, stuff in my bedroom and office at work and so on. And yeah besides textured surfaces like stucco walls or certain parts of your vehicle this thing pretty much does stick to almost everything and the sticky substance that they use is pretty good.The magnet for the charging section is actually pretty strong and it holds up very well. The neck also feels firm and definitely doesn’t go anywhere. When you set it in a position it pretty much stays there unless you hit a pretty hard bump in your vehicle or you move it on your own.It charges at a pretty standard rate of about 15 watts or at least that’s what I’ve noticed so don’t expect the new Qi2 charging on this thing but if you’re looking for something that you can take pretty much anywhere that you want to slap on any surface while you’re doing something, this will be a really good option.Now versus other products such as Anker and AOHI and BASEUS and so on, how does it fair? Truth be told it’s no better or worse than any of their other products. I can definitely recommend it as it has not let me down but also unless you’re like brand oil and you’re looking for a new product I would say these guys are pretty darn good!It uses type c which is pretty much universal and as long as you have a cable that is sturdy or very good use in your vehicle then this product should not let you down in any way. The neck piece can go not only up and down but can swivel so you can basically put it in almost any direction you need to including upside down if you say attach it to your windscreen. Plus if you do end up using it as a travel anywhere thing and don’t have access to your typical vehicular 12 volt plug or even a wall plug, you can use a power bank as well to power this product! Which I think is really cool.It adds the suction ability which is that little twisty part you see on it to give a little extra ump to make sure that not only is it vacuumly attached but also extra sticky as well. The good news is as well if you have a surface that you’re not 100% sure about it does come with a extra flat accessory that you can stick so that way you don’t actually ruin the material of your vehicle. That being said however I do recommend not leaving this in your car during the summer as because the sticky part is made out of a mix of silicon/rubber and something of the like it will potentially cause it to melt which is pretty much the only downside I’ve seen. In fact it is actually so sticky that when I first mounted it to my desk (which by the way is already well over 10 to 15 years old and showing its age) actually ripped off some of the fake wood laminate because it stuck so tightly so if you’re looking for something that is going to attach to something and not let go…. This thing is a good option.I have no real complaints if I’m going to be honest I’ve been using it pretty much day to day and even when I don’t need it to charge I can just use this as a pretty much stick anywhere mag safe mount. So don’t think that you need to use the wireless charging all the time.And as you can also finally see in the images it does collapse down to about something smaller than a Rubik’s cube which is not too bad especially if you just need to stick it somewhere in a small bag or a purse or something similar. And if you’re worried about it sticking to things, usually when you unstick it you can give it a small wash with some warm water in a sink and it should clean off most of the issues and allow it to stick right to a new surface. Remember you got to make sure the surface is as smooth and as flat as possible. Also if you see in the pictures there’s a little white piece of laminated paper that can be potentially reused to stick to the bottom of the surface that way you can keep it somewhere without having to reuse the sticky part over and over again. Makes it really good for travel!All in all a very good product and something I would definitely recommend if you’re looking to have something that’s relatively versatile!

UPDATED – new version much improved ORIGINAL – Works Sporadically
February 2026 UPDATE – Because I had noted problems with the charging on the product I had purchased (model 2E7178), LISEN reached out and offered me an updated version of the product (model 2E7187). This newer version is much improved on the original. As with the original, the suction is great and the magnet is strong. With the new one I had no problem getting my phone to start charging the instant I attached it to the charger (original often took several attempts to get it placed correctly before charging would commence). It is also somewhat faster than the original (battery was at 85% and original said would take about 40 minutes until full, new one dropped the charging time to 36 minutes). I tried it with 2 Magsafe cases and it worked with both. I am very pleased with the LISEB customer service and their updated product.ORIGINAL REVIEW: Suction holds well and the magnet is fairly strong. However, it only works with SOME Magsafe cases, and even then, it is sporadic in whether it will charge or not. It often takes several attempts to place it on the magnet before it starts charging. Charging is not fast either.

Holds 17 Pro secure and steady
Excellent product. I use it with my 17 Pro (not Max) for DoorDash/Spark delivery. Doesn’t shake, charges quickly. Strong magnet. Has never broken free and fallen on the floorboard no matter how bumpy the road. Haven’t tried with a Pro Max.

This is a nice compact 15 Watt MagSafe Car Mobile Charger, one that is affixed via a Vacuum Suction Base. The Base has a sticky material that leaves no residue, that can also be washed if needed without affecting its stickiness.𝗕𝗮𝘀𝗲 𝗣𝗮𝗱In case the surface of your car’s Dashboard is not ideal, LISEN also provides a Sticky Base Pad that uses 3M adhesive, so that should stick to most surfaces. You then Vacuum attach the Charger to that Base Pad.𝗔𝗽𝗽𝗹𝗲 & 𝗔𝗻𝗱𝗿𝗼𝗶𝗱Whilst this is geared to charge Apple iPhones that are MagSafe compatible, the Charger will also charge Android Mobiles as well, so long as they are using a MagSafe Case and can take a wireless charge.My SAMSUNG S25 Ultra is in a SmallRig MagSafe Case, and that attached fine, and charged fine too.I also found that I could charge our other SAMSUNG Mobiles, namely an S10 and an S20 FE, which both have MagSafe Cases or, rather, have MagSafe Rings now stuck to their Cases.𝗖𝗵𝗮𝗿𝗴𝗶𝗻𝗴 𝗧𝗲𝘀𝘁 𝗶𝗻 𝗺𝘆 𝗩𝗶𝗱𝗲𝗼Please note that my Mobile was already almost fully charged at 98%, so the LISEN was only drawing around 11 Watts. If my Mobile’s Battery had been more depleted of charge, then the LISEN would have negotiated up to 15 Watts with the Vehicle based Charger (I did use one, that I supplied with 13.3 Volts from a Desk Top Power Supply.𝗦𝘂𝗺𝗺𝗮𝗿𝘆This is a good no frills MagSafe Charger. Personally, I would have liked to see a Status LED, to show when Charging or when fully Charged, say Amber and Green respectively.I’d also have liked to see a suitable 12 Volt Charging Unit for the Car, these are not that costly, so it seemed like a false economy not to include one in the package.𝗪𝗼𝘂𝗹𝗱 𝗜 𝗕𝘂𝘆 𝗧𝗵𝗶𝘀?Yes, it charges well, and is very compact.Model Code: 𝗪𝟲𝟬𝟴.Part Code: 𝟮𝗘𝟳𝟭𝟳𝟴.ASIN: 𝗕𝟬𝗙𝗚𝗖𝗥𝟵𝗟𝗦𝗣.

Hält, was er verspricht! Top Halterung! Klebt auf jeder Oberfläche!

Este soporte me parece una opción práctica y cómoda si necesitas tener el móvil fijo en el coche o en una superficie lisa sin complicaciones. El sistema de succión junto con el magnetismo lo hacen fácil de colocar y útil para viajes o uso diario en el coche. Si lo usas en el coche, conviene limpiar bien la zona antes de fijarlo para asegurar que la succión funcione bien. El hecho de ser magnético hace que poner o quitar el móvil sea muy rápido, ideal para GPS o llamadas manos libres. Para viajes largos lo veo muy práctico, aunque con superficies poco lisas prefiero usar un soporte que se sujete de otra forma.Pros• El sistema de succión parece garantizar que el soporte se quede bien fijo, incluso en trayectos con baches.• La sujeción magnética permite colocar o retirar el móvil con una sola mano, muy cómodo cuando conduces.• Compatible con muchos modelos de móvil, lo que lo hace versátil si cambias de teléfono.• Diseño compacto que no ocupa mucho espacio en la consola o salpicadero.Contras• Como todos los soportes magnéticos, puede no ser ideal si usas una funda muy gruesa o metálica en el móvil.• La succión exige que la superficie esté limpia y lisa, si el salpicadero o cristal están sucios o texturados, puede perder agarre.• Si el imán no es muy potente o el móvil es pesado, puede despegarse con vibraciones fuertes.