Ditch Light Brackets, 2PCS Hood Mount Light Brackets Universal Adjustable Aluminum Alloy Pillar Hood Led Work Light Pods Mount Bracket Kit for Truck SUV Cars, No Need Drilling
Original price was: $29.89.$22.99Current price is: $22.99.
Guaranteed Safe Checkout
Features & Compatibility
Price: [price_with_discount]
(as of [price_update_date] – Details)
[ad_1]
Product description
First, unscrew the screws at the bottom of this bracket outward
Then clip the bracket directly into the car hood, determine its position, and tighten the screws at the bottom of the bracket.
Secure the lamp bracket with the screws above to ensure it is secure.
Finally, simply install the car lights, which is a very convenient installation process and can be quickly installed.
GOOD MATERIALS: The light bar hood brackets are made of 6063 aluminum alloy. The surface has a special coating that can prevent corrosion and rust，dustproof. Very hard and durable, not easily damaged
ANTI SLIP RUBBER PAD DESIGN: This ditch light bracket has a rubber pad design inside, which can prevent slipping and ensure a secure installation. It can also protect the surface of the vehicle from scratches
EASY TO INSTALL: No need to drill holes, just install with screws. The anti slip rubber pad and screws can firmly secure this bracket to the car, making it very suitable for daily use
WIDE COMPATIBILITY: Universal light bar hood brackets compatble with all car hoods, like trucks, jeeps, pickups, SUV(Not for ATV/UTV). Suitable for most LED work lights/fog lights/ dring lights or light bars, etc
ADJUSTED FREELY: Hood light mount bracket ensures that your light is in the exact lighting direction and at the perfect lighting angle to achieve the best lighting angle
PACK LIST: Ditch light mounts x2, screwdrivers x2, instruction x1
[ad_2]
Ramses –
Good
Very good and easy installation
Katie P. –
Easy Installation
These were very easy to install for adding ditch lights. The brackets have multiple screws to make sure everything is safely secured from underneath. I don’t foresee an issue with the screws loosening up but I’ll recheck after several trips down the dirt road.
Kyle –
Last-Minute4x4
Great little mounts, was very hesitant on them at first but after they arrived in shipping I was pretty pleased nice simple set up black so they match my truck.. they hold very tight.. they have anl nice thick rubber padding to help fourm to any good and also to help prevent any scratching.. I do recommend using some blue lock tight on all the small bolts when you get them all set where you want too to ensure you don’t lose any tiny hardware while driving..
Bluesman –
Heavy Duty Brackets That Eliminate Drilling
I’ve been wanting to add LED flood lights to the front of my Kubota tractor. It’s a new machine and I haven’t wanted to drill holes in it. Doing so will cause rust and anxiety. My tractor has a factory grill guard and I thought it’d be great to install the LED floods on the top of it so I can light up the area ahead of me, even if the front bucket is lifted off the ground a few feet. Usually, the factory headlights are useless because of the front loader. I almost drilled holes in the powder-coated push bar and then discovered these brackets.My tractor push bar is made of 3/16″ steel. Pretty thick actually. But these brackets are built to handle it. You get two of them in the kit with all the hardware needed to install. They opened plenty wide enough to clamp over the metal push bar without any problems. Each bracket has multiple clamping screws and rubber pads to hold evenly and tightly, and protect the finish in the process. They installed quickly and my LED floods mounted to them as if they were paired at the factory. Perfect! They look awesome and work wonderfully, and I can always move them or remove altogether without leaving any holes or damage.I’m so happy with these light bracket. They are over-built and well engineered; much heavier and better than the listing describes or the photos show. I fully recommend these for any application where you need mount things and don’t want to drill holes. I used them for lighting but they could hold all sorts of things that need to bolt onto something. Great product and excellent seller. Order with utmost confidence. You’ll be impressed.
Richard Byrd –
Easy, non permanent install
These clamps are a quick and easy way to mount hood lights. They’re also cheaper than most other mounts. There are of course some caveats to these mounts, but overall they’re good.The first thing I did was to place some clear vinyl on my hood, on top and under where the clamps contact the hood, just an extra layer of protection for my paint. Another drawback is that the mount is clamped to a relatively thin sheet metal hood, so you have to use caution when adjusting the lights and tightening the hardware. If you’re not careful you will flex the hood and can easily bend it with the added leverage of a ratchet. The last thing is that the lights will be a little more in your field of view vs other mounting methods.For me in my situation, these drawbacks are minor and I’m enjoying having ditch lights. The mounts themselves are low profile and don’t stand out much. These do have logos on them but the logos are pretty small and they’re on the back side, which would be towards your windshield and also behind the large mounting screw, so they’re not too visible. I put some blue Loctite on the set screws to make sure they don’t back out and the lights are solid.
Shane –
Worth it hands down
Great for the price but will fade to a copper type color shortly. Mine needed some modifications for my VW to clear the wiper arm but still holding strong otherwise.
ALFREDO –
Do not purchase this product if you don’t have a flat hood.
This product did not work on my vehicle, the vibration causes the screws to loosen up, which made the mount+light (No, I wasn’t using a heavy light, or driving in rough terrain). This caused my hood to bend, and caused like $200 worth of body damage.
Terrene Trexler –
Great for hood-mounted lighting!
I got these low profile lighting mounts to place a few light pods on the hood of my car and they work great! The don’t stand up too much and just plain don’t move when tightened down. I did add a tiny bit of blue loctite to the threads to keep it from untightening with the vibration.10/10….Excellent low profile lighting mount at an excellent price!
Corey Brazil –
Holds the ditch lights securely to the lip of the hood. Easy install