Front Bumper Clips Black 12PC Quick Release Bumper Clips it Can be Applied to Front and Rear Bumpers,Trunks,Fenders,Hatches,Hoods,Etc.
$9.99
Guaranteed Safe Checkout
Features & Compatibility
Price: $9.99
(as of May 13, 2026 19:18:53 UTC – Details)
Product description
More color options.
Easy to disassemble, two types of strapping.
Suitable for front and rear bumpers, trunks, fenders, hatch Ids, hoods, etc.
NBR rubber： Better rubber rings.
Extra 10 rubber rings.
Easy installation.
Product Details
Brand:Mejiao
Color:Black
Main material: Aluminum alloy
Package: 4 x Bumper quick release tabs, 4 x Stainless steel bolts, 4 x Nuts, 4 x Spacers, 12 x Customized nitrile rubber (NBR) O-Rings.
Application: Universal.
Easy installation: Our bumper quick release fasteners kit comes with all the necessary parts and instructions to make installation a breeze. Simply remove the bumper fasteners and O-rubber ring, lift the bumper to the desired position, mark the hole position on the mudguard, and install the fasteners. The kit is designed for a tightly symmetrical effect, and the rubber’s elasticity allows for slight spacing adjustments.
Durable custom rubber: Our kit uses customized nitrile rubber (NBR) that is wear-resistant, heat-resistant, and has a wider range of operating temperatures than other rubbers. We’ve also included 10 extra rubber rings for your convenience.
Stable aluminum alloy: Our quick release bumper fasteners are made of high-quality aluminum alloy, a common structural material in auto parts that provides excellent hardness and strength for added stability.
Complete package: The kit includes 4 black bumper quick release tabs, 4 stainless steel bolts, 4 nuts, 4 washers, and 12 customized NBR O-rings (10 for replacement use).
Hassle-free warranty: We offer a 12-month warranty and 24-hour friendly customer service. If you’re not satisfied with the product or if any parts are missing, contact us for a new one or a refund. We’re committed to your satisfaction and want you to order with peace of mind.
Yoel Perez –
They look nice and do the work.
They look nice and do it’s work. I bought them to help me hold my front bumper and so far, after couple of weeks they still holding in place. They also look nice and were easy to install. Definitely worth the price.
Maricella –
Perfect product
Perfect for what I needed and was easily able to install
Liliam Mejia –
Muy buena calidad
Excelente compraFácil usoResistentes
José H Jiménez –
Económico
Excelente
Leroy W. –
Simple enough does what it says
Comes with all of the hardware to Install.The rear nuts are 10mm sized sockets. The bolts themselves are not all that long. Require a hex, Allen key, to help tighten. The nuts are the metal with plastic retainer so no lock tite is needed. It does not come with instructions but simple enough.1) Decided where you wish to place the hardware.2) Measure on the inside of both parts of your fender, make sure you have room for the instal and bolts are long enough. If not your going to have to remove part of the bumper and any Plastic wheel we’ll linings (consult google or vehicle owners manual if unsure how)3) Mark the drill points using the empty middle of the rubber band holder( The colored hardware piece)4) Insert the bolt through the colored hardware and screw into the hole on the fender/bumper.5) Place the washer onto the back side of the bolt the inside portion of the fender. Aftwards screw on the nut.6) use a 10mm socket and a hex to hold the bolt from the other side. Then tighten the nut.7) Complete the other side. To measure quickly for tension, Place the rubber band on the mounted portion and the unmounted stretch to desired tention and mark the point with the center of the colored piece that has not been mounted.8) Place the rubber band over both colored pieces and check for movement and tension.Will update for life span of the rubber pieces but that seems to be the week point of this setup. The kit does give you many of these pieces however.
Jasminaaa –
Bands are no good.
I wanted to like this. The assembly wasn’t to gruesome. But the BANDS are my worst enemy, they snap or unattached themselves alot. I tried double wrapping but it’s not really elastic, it’s more of a rubber material so doesn’t do very much in terms of getting or staying tight. Ended up putting literally thick hairbands while I was rigging it for the 4th time losing the bands to the environments ha. It does come with plenty of extra bands… I’m assuming for that very reason.
Madelyn Reid –
Good
Good quality
Customer –
Helpful Hints
Hey guys just got mine may, 12, 2025 it works as long as u get all the correct parts . I got extra rubber rings but no extra anything else, so if u mess up and/or lose anything it’s over with.INTRUCTIONS……There is none but it’s self explanatoryYou have to make a whole in your bumpers to fit the screw through, make sure it’s the right size and not too big.Than you put the screw through the black round thingyThat they call bumper fastener or whatever color you ended up getting, and than you put both of them through the whole you made.Than you take the big metal ring that they call washer and put it from the other side together with the smallNut.You have to do all that 4 timesIf you still confuse look at the pictures so you can know what’s what and check YouTube videos.Ps.You should know you will have to drill holes into your bumper with some type of drill and make sure your able to reach under the bumper to put the nut in from the other side it’s not as easy as it looks but if I could do it u can too.